Current Topics
Is it too soon to be talking 2020?
by pdx rick
03:20 AM
RoundTable for Summer 2020
by pondering_it_all
12:43 AM
What is the purpose of Capitalism?
by pondering_it_all
12:38 AM
Coronavirus: The Plague of The 21st Century?
by pondering_it_all
10:13 PM
Little Houses
by pondering_it_all
09:42 PM
There needs to be a ‘real reckoning’ for Trump’s abuses if Biden wins
by jgw
07:30 PM
Mysteries not solved
by jgw
06:29 PM
WV woman goes to Mexico with her daughter and series of TOP SECRET U.S docs
by pdx rick
07/08/20 11:07 PM
Batsh!t crazy Kanye West just announced he's running for POTUS in 2020.
by perotista
07/07/20 11:45 PM
Drug prices
by jgw
07/07/20 05:29 PM
The Departed - 2020
by pondering_it_all
07/07/20 07:10 AM
Medications that might help against SARS-CoV-2
by pondering_it_all
07/07/20 07:01 AM
Decisions
by pondering_it_all
07/06/20 07:12 PM
congress gets
by jgw
07/05/20 07:49 PM
Normal Stuff
by jgw
07/05/20 06:30 PM
the Trump Plan
by pdx rick
07/04/20 05:34 PM
Russia Secretly Offered Afghan Militants Bounties to Kill U.S. Troops, US Intel
by pdx rick
07/04/20 05:24 PM
What is wealth? How is it made? How is it accounted?
by logtroll
07/04/20 12:44 AM
These are, apparently, college kids?
by pondering_it_all
07/03/20 07:50 PM
State Voters and Covid-19
by jgw
07/03/20 07:39 PM
Forum Stats
6292 Members
60 Forums
16960 Topics
301109 Posts

Max Online: 294 @ 12/06/17 12:57 AM
Google Adsense
Topic Options
Rate This Topic
#323507 - 03/29/20 12:43 AM ventilators
jgw Offline
enthusiast

Registered: 05/22/06
Posts: 3353
Loc: Port Angeles, WA
I see that MIT has had a cheap ventilator design for several years that they are now releasing. Its smart and its cheap (a lot cheaper than what is available right now). Wonder if anybody has picked up on this one yet?

http://news.mit.edu/2020/ventilator-covid-deployment-open-source-low-cost-0326

Here is a link to the MIT site:
https://e-vent.mit.edu/


Edited by jgw (03/30/20 08:11 PM)

Top
#323574 - 03/29/20 09:07 PM Re: ventilators [Re: jgw]
pondering_it_all Offline
veteran

Registered: 02/27/06
Posts: 10000
Loc: North San Diego County
Several metal parts to fabricate there. The large aluminum extrusion at the front is just a piece of a common extrusion widely available. But it looks like some other pieces are not so common. They would need to be cut or stamped from aluminum plate. Each one would also have a motor with a motor speed controller so it can be set for speed. I don't see any adjustment for tidal volume, but some air is better than none. PEEP (positive end expiratory pressure) is important for Covid-19 patients but I suppose they could rig something up with the exhaust connected to a water bottle.

Metal parts can be cut or stamped out within a few days, then very quickly. But you may need to get the aluminum plate shipped to the metal shop. The motor speed control could be designed in one day, but fabrication typically takes several days to get PC boards and get the assembler ramped up. The motor is a bit more difficult. I assume they used a standard off-the-shelf motor. That would have a supply chain and some in stock. They probably come in from China. Beyond existing inventory, it would take weeks to get more.

So yes, it can be made inexpensively, but not fast to delivery of more than a few thousand. Maybe a few hundred. But it also assumes hospitals have a lot of ambu bags, which they don't. This is more of an ambulance item, for getting people breathing after respiratory arrest. As soon as they get them to the hospital they go on a ventilator. They probably have a few on each floor of the hospital for arrests, some in the ER, and more in the ICU. But not one in every room of the hospital. I doubt they have a lot of extra sitting around unused.

On the other hand, there is a story about a family in India keeping their child bagged for years by taking shifts. But I assume he is brain dead: You don't need much brain to breath.

Bagging is difficult because the person squeezing the bag also has to keep the nose and mouth mask firmly on the patient. Otherwise you can paralyze the patient and put in an endotracheal tube. Where do they get all those ET tubes? Where do they get all the anesthesiologists to keep them paralyzed?

Top
#323581 - 03/29/20 10:17 PM Re: ventilators [Re: jgw]
NW Ponderer Offline
Moderator
Carpal Tunnel

Registered: 09/09/11
Posts: 17399
Inserting an ET tube is a delicate process and can cause serious injury. My wife has a permanent tracheotomy as a result of that. But, there is going to be plenty of opportunity for practice (unfortunately). There is usually a team of people involved in setting up the ventilator, a critical care nurse, an anesthetist or anesthesiologist, and a respiratory therapist. We keep a bag and mask available at all times, but having a trache makes that complicated. Also, bag and mask can also cause injury, especially on compromised individuals and small children. Training is required for all of these things.

Also, ventilators in COVID cases are used for far longer than in the typical cases (10+ days vs 3).

Top
#323592 - 03/30/20 12:46 AM Re: ventilators [Re: jgw]
pondering_it_all Offline
veteran

Registered: 02/27/06
Posts: 10000
Loc: North San Diego County
I've put in hundreds of ET tubes, but all in dogs. We would use a lighted scope and you can actually see the vocal chords in dogs. It's a LOT easier to do with the scopes that have a little camera now.

It's the tidal volume you have to adjust for different size people. That's why the expensive vents these days have a settable pressure relief valve so you don't pop the patient's lung. You need to get a certain amount of air in there, but not too much. Lungs get less compliant as they fill with fluid. If you do get a collapsed lung, you are just inflating the chest cavity and not the lungs. Then they need a chest tube.

Top

Who's Online
0 registered (), 58 Guests and 1 Spider online.
Key: Admin, Global Mod, Mod
Newest Members
Superfly, GreatNewsTonight, danarhea, RoughDraft274, CPWILL
6292 Registered Users
A2